| ITEM | DESCRIPTION | PRICE |
|---|---|---|
Skiworx Triple Pisser Kit |
To fix a Kawasaki blunder, we designed a water bypass kit that will allow the rider to watch the cooling bypass of all three of their cylinders. From the factory, Kawasaki only installed one in the front and the rest in the rear (where no one can see). Our kit not only relocates them all to the front, but it includes new head fittings that are straight not 90 degrees which can clog up. This is a must have for any Kawasaki 1200! See More...Note: This is a complete kit which we have taken the guess work out of. Remember the head fitting MUST have the correct ID or the craft will go into limp mode for an over heat condition. |
|
Skiworx |
Our "Level 1" is perfect for someone who wants to start out small. This kit does require that you remove some of your parts and send them to us for modding. This kit (when installed properly) can give gains of anywhere from 3-5 MPH and a lot of acceleration. We will need your carbs, exhaust stinger and pump. The mods will include our CV carb mod, the Skiworx stinger mod, installing a blueprinted Solas 16/20 impeller and blueprinting the pump, and installing new bearings and seals. The kit will also include 42 CC cylinder heads. See More...
NOTE: YOU MAY PURCHASE MODS IN KIT SEPERATELY |
$1,250 |
Skiworx |
Our "Level 1" is perfect for someone who wants to start out small. This kit does require that you remove some of your parts and send them to us for modding. This kit (when installed properly) can give gains of anywhere from 3-5 MPH and a lot of acceleration. We will need your carbs, exhaust stinger and pump. The mods will include our CV carb mod, the Skiworx Stinger mod and a Skat-Trak 14-24R impeller. The kit will also include 42 CC cylinder heads.* See More...
*** Our billet heads are available at an additional cost. NOTE: YOU MAY PURCHASE MODS IN KIT SEPERATELY |
$999 |
Skiworx Stinger Mod |
The Skiworx stinger mod will help your Ultra/STX-R accelerate much quicker. This mod is simple to install. It does require you to remove your stinger and send it to us for the modification. The modded stinger section will be sent back, along with a complete kit and detailed install instructions. |
$175 |
Skiworx CV Carb Mod |
Our exclusive Skiworx CV carb mod is the real secret to making power with the Kawasaki 1200. Over the years, many have tried to use aftermarket flame arrestors with CV carbs and have seen disastrous results. With this CV carb mod, you will now be safe to use PROK (modded by us) FA's. You will need to send us your carbs and stock flame arrestor for this mod. If PROKS will be used, we will not need your stock FA. See More...NOTE: We do not sell any parts for this mod outright. We also do not recommend this mod unless the compression has been raised. |
$250 |
Complete Kawasaki 1200 Top End Kit |
We use WSM top end kit parts in our rebuilds and we recommend them to our customers. Kits include pistons, rings, pins, cir clips base and head gaskets, and top end bearings. See More...Note: We use these pistons in our flat top kits. |
$360 |
Skiworx Ultra 150 Pump Bearing Kit |
Kawasaki has had major issues with the Ultra 150 bearings and seals since day 1. The problem has been inferior seal design. This problem can now be fixed with our bearing and seal kit. We prefer to install these parts in house. Please call for more info. |
$125 |